

The MIBs required and the order they should be loaded are:

RFC 1213,           MIB II
RFC 1271,	    RMON 	
RFC 1493,           Bridge
RFC 1516,           Repeater
RFC 1573,           ifTable extensions
RFC 1595,           SONET
RFC 1695,           AToM
RFC 1757,           RMON
RFC 1903,           SNMPV2
ibm8271a.mib,	ATM Forum LEC MIB (LAN-EMULATION-CLIENT-MIB)  
ibm8271b.mib,	This contains the leaves for 8271.  - (A3COM-PRODUCTS-MIB DEFINITIONS)  
		Used to allocate new branches under the {a3Com.generic} MIB branch  - 		                         		(A3COM0004-GENERIC DEFINITIONS)
		3Com PDD proprietary Software Upgrade  - (A3COM0007-SYSLOADER DEFINITIONS)
ibm8271c.mib,	Access Control & Agent Security.  3Com LAN Security
		Architecture - Mgmt Access  - (A3COM0008-SECURITY DEFINITIONS)
		Control of RS232 port  - (A3COM0009-RS232 DEFINITIONS)
		Mapping between repeater ports and MAC address-(A3COM0010-ENDSTATION DEFINITIONS)
		SNMP Trap destination table  - (A3COM0012-TRAPTABLE2 DEFINITIONS)
		Configuration of Resilient link  - (A3COM0014-RESILIENTLINKS DEFINITIONS)
		Remote poll  - (A3COM0018-REMOTE-POLL DEFINITIONS)
ibm8271d.mib,	Redundant Power Supply  - (A3COM0020-RPS DEFINITIONS)
		Bridge, STP and Filtering Database Management - (A3COM0040-GENERIC-BRIDGE 				DEFINITIONS) MIB for creating VLANs and mapping global to local
		identifiers for those VLANs  - (A3COM0041-GENERIC-3COM-VLAN DEFINITIONS)
		3Com Standard for managing client of a VLAN Server  -                                                                 				(A3COM0042-VLAN-CLIENT-MIB DEFINITIONS)	revised version of the 3Com chassis MIB 				for 1000 and 3000  - (A3COM0046-CHASSIS DEFINITIONS)
ibm8271e.mib,	Gauges - replaced by RMON alarms  - (A3COMMG009-GAUGES DEFINITIONS)    
		Multi Repeater MIB (MRM)  -(A3COMMG005-MRM-MIB DEFINITIONS)
		LAN Security Architecture -Port security-(A3COMMG003-PORT-SECURITY DEFINITIONS)
		Device specific MIB  - (A3COMMG004-LINKSWITCH DEFINITIONS)
ibm8271f.mib 	Fault Log  - (A3COMMG006-FAULT-LOG DEFINITIONS)
		ASCII Agent  - (A3COMMG007-ASCII-AGENT DEFINITIONS)
		ATM Module device specific MIB  - (A3COMMG008-ATM-MODULE DEFINITIONS) 
		This contains an early 3Com bridge MIB - it is used to stop and start STP and for 				the CAM full and nearly full traps - (A3COMMG011-BRIDGE DEFINITIONS)
		This is a copy of the required portion of the IPX MIB - you may
		wish to use the IPX itself rather than our scaled down version.  - (AMG010-IPX 		DEFINITIONS)


